TLV 800 | TLV 966 | TLV 1166 | ||
---|---|---|---|---|
Table | ||||
Size | mm | 800x500 | 1000x600 | 1100x600 |
“T” Slots | n°/mm | 5/18x80 | 5/18x100 | 5/18x100 |
Max. Load | kg | 450 | 1000 | 1000 |
Travel | ||||
X axis | mm | 700 | 900 | 1000 |
Y axis | mm | 500 | 600 | 600 |
Z axis | mm | 460 | 600 | 600 |
Spindle | ||||
Distance beetwen nose table surface | mm | 150-610 | 150-750 | 150-750 |
Beetwen spindle center to column | mm | 575 | 650 | 650 |
Spindle motor | kW | 7,5 | 11 | 15 |
Spindle speed | giri/’ | 10000 | 8000 | 8000 |
Spindle Taper | BT | 40 | 40 | 40 |
Motors | ||||
X,Y,Z axes motors | kW | 1,2/1,2/1,2 | 2,5/2,5/2,5 | 2,5/2,5/2,5 |
Lubrication pump | W | 100 | 100 | 100 |
Coolan pump | W | 640 | 640 | 640 |
Feedrate | ||||
Rapid traverse X,Y,Z | m./min | 30/30/30 | 30/30/30 | 30/30/30 |
Cutting feed | mm/min | 10000 | 10000 | 10000 |
ATC | ||||
Tool capacity | no | 16 | 24 | 24 |
Max tool Ø | mm | 80 | 80 | 80 |
Max tool Ø (not adj. tool) | mm | 120 | 120 | 120 |
Max tool length | mm | 250 | 300 | 300 |
max tool weight | kg | 7 | 8 | 8 |
General information | ||||
Coolant tank capacity | L. | 200 | 570 | 590 |
Air pressure required | kg./cm2 | 6-8 | 6-8 | 6-8 |
Power required | kVA | 20 | 30 | 30 |
Machine weight (approx) | kg | 5350 | 5850 | 6100 |
Dimensions ( W x l ) | mm | 1950x2150 | 2500x2990 | 2650x3050 |
Dimensions (H) | mm | 2300 | 2700 | 2750 |
Major casting pieces are Meehanite grade cast iron
Structure of column, base, saddle and head are ribs
reinforced to ensure the best rigidity
3 axis with linear ways
Counter balanced weight ensures smooth head movement at rapid feed
Rigid spindle, balanced with pulley and pre-run to 24 hours
to check heat rise, noise and vibration before assembles to the headstock