LUX 210/80 | LUX 250/80 | LUX 300/80 | ||
---|---|---|---|---|
Center height | mm | 210 | 250 | 300 |
Swing over bed | mm | 420 | 500 | 600 |
Swing in gap | mm | 550 | 630 | 730 |
Swing over cross slide | mm | 225 | 325 | 360 |
Gap in front of faceplate | mm | 260 | 260 | 260 |
Bed width | mm | 330 | 330 | 330 |
Distance between centers | mm | 1000/1500/2000 | 1000/1500/2000 | 1000/1500/2000 |
Type of spindle nose | D1/6 | D1/6 | D1/6 | |
Main spindle bore | mm | 80 | 80 | 80 |
Taper of spindle sleeve | Cono Morse n.6 / MT#6 | Cono Morse n.6 / MT#6 | Cono Morse n.6 / MT#6 | |
Spindle speeds | 24-1600 | 24-1600 | 24-1600 | |
Number of spindle speeds | 15 | 15 | 15 | |
Cross slide travel | mm | 305 | 330 | 380 |
Top slide travel | mm | 130 | 130 | 130 |
Leadscrew diameter/pitch | mm | 35 x 6 | 35 x 6 | 35 x 6 |
Metric cutting | mm | n.66 0.5-28 | n.66 0.5-28 | n.66 0.5-28 |
Whitworth threads cutting | n.66 1-56 tpi | n.66 1-56 tpi | n.66 1-56 tpi | |
Module pitch cutting | mm | n.33 0.5-3.5 | n.33 0.5-3.5 | n.33 0.5-3.5 |
Diametral pitch cutting | n.33 8-56 DP | n.33 8-56 DP | n.33 8-56 DP | |
Range of longitudinal feed/rev | mm/giro | n.66 0.072-4.038 | n.66 0.072-4.038 n.66 | 0.072-4.038 |
Range off cross feed/rev | mm/giro | n.66 0.036-2.019 | n.66 0.036-2.019 | n.66 0.036-2.019 |
Quill diameter tailstock | mm | 65 | 65 | 65 |
Quill travel tailstock | mm | 120 | 120 | 120 |
Taper of center tailstock | Cono Morse n.5 / MT#5 | Cono Morse n.5 / MT#5 | Cono Morse n.5 / MT#5 | |
Main drive motor | Kw | 7.5 | 7.5 | 7.5 |
Net weight | Kg | 1600/1820/2070 | 1640/1870/2130 | 1800/2010/2250 |
Gross weight | Kg | 1900/2120/2370 | 1940/2170/2430 | 2100/2310/2550 |
Packing size-length | mm | 2420/2920/3460 | 2420/2920/3460 | 2420/2920/3460 |
Packing size-width | mm | 1150 | 1150 | 1150 |
Packing size-height | mm | 1700 | 1750 | 1800 |
STANDARD ACCESSORIES
CE
Tool box with set of service wrenches
3 jaw scroll chuck
4 jaw independent chuck
Steady rest and follow rest
Working light
Coolant system
Fully length splash guard
Safety shield for self centering chuck
Safety shield for tool post
Safety shield for leadscrew
Center sleeves
Center MT No.5
Auto stop device for longitudinal
OPTIONAL ACCESSORIES
2 or 3 axes digital readout
Quick tool change turrett