460 | 510 | 560 | 660 | 760 | ||
---|---|---|---|---|---|---|
CAPACITY | ||||||
Center height | mm | 230 | 255 | 280 | 330 | 380 |
Swing over bed | mm | 460 | 510 | 560 | 660 | 760 |
Swing over cross slide | mm | 270 | 320 | 370 | 470 | 570 |
Swing over gap | mm | 710 | 760 | 900 | 1000 | 1100 |
Distance between centers | mm | 1100-1600-2100-3100 | 1000-1500-2000-2500-3000-3500-4000-5000 | |||
HEADSTOCK | ||||||
Spindle nose | D1-8” | D1-8” / D1-11 (opt) | ||||
Spindle bore | mm | 80 | 102 | 104/130 (opt) | ||
Spindle speed steps | n. | 12 | ||||
Spindle speed | rpm | 32~1500 | 25~1250 | |||
FEED AND THREAD | ||||||
Leadscrew diameter | mm | 35 p 4 | 45 p 4 | |||
Inch thread range | inch | 2~72 / 45 tipi (45 kinds) | 2~28 t.p.i. | |||
Metric thread range | mm | 0,2~14 / 41 tipi (41 kinds) | 0,8~14 | |||
D.P. threads | D.P. | 8~44 / 21 tipi (21 kinds) | 4~56 | |||
Mdule threads | mm | 0,3~3,5 / 18 tipi (18 kinds) | 0,5~7 | |||
Number of feed | n. | 32 | 36 | |||
Longitudinal feed range | mm/rev | 0,04~1 | 0,05~0,7 | |||
Cross feed range | mm/rev | 0,02~0,05 | 0,025-0,35 | |||
TOOL SLIDE | ||||||
Cross slide travel | mm | 260 | 380 | |||
Compound rest travel | mm | 127 | 255 | |||
TAILSTOCK | ||||||
Quill travel | mm | 130 | 180 | |||
Quill diameter | mm | 75 | 75 | |||
Taper of center | C.M.5 (M.T.#5) | |||||
BED | ||||||
Height of bed | mm | 330 | 410 | |||
Main spindle motor | HP | 10 | 15/20 (opt) | |||
Rapid motor | HP | 1/8 | ||||
Coolant pump motor | HP | 1/8 | ||||
Weight | Kg | 2000-2300-2800-3200 | 2400-2700-3000-3300-3700-4500-5200-6000 |
Mechanical clutch and brake
STANDARD ACCESSORIES
Back plate
Face plate
Center rest
M.T.#5 center
Coolant pump
Tool box
OPTIONAL ACCESSORIES
3 jaw chuck
4 jaw independent
Follow rest