XL 6336 | ||
---|---|---|
TABLE | ||
Table size | mm | 1250x360 |
T slot | n./mm | 3 /18 x 80 |
Max. load of table | kg | 300 |
TRAVEL | ||
Longitudinal | mm | 1000 |
Cross | mm | 320 |
Vertical | mm | 350 |
VERTICAL SPINDLE | ||
Spindle taper | ISO 40 (V) ISO 50 (H) | |
Vertical spindle speed/step | rpm | 63-2920 / 10 |
Horizontal spindle speed/step | rpm | 60-1800 / 12 |
Max. end milling width | mm | 125 |
Max. vertical drilling diameter | mm | 30 |
Max.vertical milling diameter | mm | 25 |
Max. tapping dia | mm | 16 |
Quill travel | mm | 124 |
Automatic spindle feeds | mm | 0.04/0.08/0.15 |
Swivel headstock R/L | ± 45° | |
Vertical Spindle to column | mm | 200-600 |
Vertical spindle to table | mm | 180-530 |
Horizontal Spindle to table | mm | 0-360 |
Horizontal Spindle to arm bottom | mm | 230 |
Arm travel | mm | 400 |
FEEDS | ||
Longitudinal/cross | mm/min | 20-360 540 max /8 steps |
Rapid vertical | mm/min | 590 |
Longitudinal/cross rapid | mm/min | 1200 |
POWER | ||
Spindle’s main motors | kw | 4 / 5.5 |
Feed motors (X,Y,Z) | 0,55 (X,Y)- 0,75 (Z) | |
Coolant motor | kw | 0.04 |
DIMENSIONS AND WEIGHT | ||
Overall dimension | mm | 2200x1790x2360 |
Net / gross weight | kg | 2340/2540 |
STANDARD ACCESSORIES
drill chuck Ø 16 mm
milling chuck Ø 4 – Ø 16
horizontal Milling arbor Ø 40- Ø 27
wrenche
reduction sleeve
lamp
operation manual