TURRET MILLING MACHINES
BOMAC - TURRET MILLING MACHINE FU 35/TV
| FU 35/TV | ||
|---|---|---|
| TABLE | ||
| Table size | mm | 1320x320 |
| T slot | n./mm | 5 /14 x 63 |
| Max. load of table | kg | 300 |
| TRAVEL | ||
| Longitudinal | mm | 800 |
| Cross | mm | 300 |
| Vertical | mm | 400 |
| VERTICAL SPINDLE | ||
| Spindle taper | ISO 40 | |
| Vertical spindle speed/step | rpm | 90-2000 / 8 |
| Horizontal spindle speed/step | rpm | 38-1310 / 12 |
| Max. end milling width | mm | 125 |
| Max. vertical drilling diameter | mm | 30 |
| Max.vertical milling diameter | mm | 25 |
| Max. tapping dia | mm | 16 |
| Quill travel | mm | 120 |
| Automatic spindle feeds | mm | 0.08/0.15/0.25 |
| Swivel headstock R/L | ± 45° | |
| Vertical Spindle to column | mm | 200-780 |
| Vertical spindle to table | mm | 180-580 |
| Horizontal Spindle to table | mm | 0-360 |
| Horizontal Spindle to arm bottom | mm | 175 |
| Arm travel | mm | 400 |
| FEEDS | ||
| Longitudinal/cross | mm/min | 20-360 /8 steps |
| Rapid vertical | mm/min | 422 |
| Longitudinal/cross rapid | mm/min | 1200 |
| POWER | ||
| Spindle’s main motors | kw | 2.2 |
| Feed motors (X,Y,Z) | 0,55 (X,Y)- 0,75 (Z) | |
| Coolant motor | kw | 0.04 |
| DIMENSIONS AND WEIGHT | ||
| Overall dimension | mm | 1710x1720x2330 |
| Package dimensions | mm | 1800x1820x2250 |
| Net / gross weight | kg | 2000/2200 |
STANDARD ACCESSORIES
drill chuck
milling chuck Ø 4 – Ø 16
horizontal Milling arbor Ø 40- Ø 27
wrenche
reduction sleeve ISO40-CM3 / ISO40-CM2
Milling chuck set ISO 40 (4,5,6,8,12,14,16)
lamp
operation manual